CNC Hydraulic Press Brake

Product Details:

CNC Press Brake

• New EU streamlined design 
• The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress
• The press brake frame adopt shot blast to remove rust and sprayed with anti-rust treatment 
• The controller can control the Y1 and Y2 axes (Yl controls the left cylinder and Y2 controls the right cylinder) to ensure the synchronous movement of the ram 
• The main oil pump does not apply work under the drive of the servo main motor, and the energy consumption is 60% lower than that of the general CNC press brake machine 
• The press brake adopt the latest high-frequency hydraulic control technology, which is faster, more efficient and more stable 

Standard Equipments And Features 

• Y1, Y2 precision ram positioning X Axis Back Gauge 
• Large Open Height, Stroke & Throat Depth 
• Back Gauge - Motorized and Linear Guide & Ball Bearing System 
• Quick release clamping 
• Front sheet support arms with full-length linear guide, T-slot 
• World-class hydraulic and electronic components 
• - Hydraulic blocks and valves 
• - Hydraulic pump 
• - Electronics system 
• Double servo motor and servo drive 
• Amada or Euro type tooling 
• Machine structure is heavier compare to others 
• Machine's approach and working speed is higher 
• Our machines are stable with less maintenance 

Machine Components:

• Quick Clamping
• High precision and fast clamping system
• Fast and easy to change the tooling efficiently 

Controller:
Our CNC series press brake can be equipped with Delem DA52s, DA58T, DA66T controller and Esa 5530, S630 controller. The selection of the controller should be based on practical use and budget. 

Backgauge:
We using the Taiwan HIWIN ball screw and linear guide to ensure the moving of X-axis with higher accuracy than using rod. And the backgauge adopt timing belt & wheel mechanism which is controlled by AC servo motor. 

Punch & Die:
The standard top punch and dual-V bottom die are specially designed for bending sheet metals. More toolings can be selected as per practical use. Material and HRC47 degree values are marked on it. 

Oil Pump:

• Amazing low noise, made of high strength cast iron and unique design for inner noise reduction
• Low sensitivity to oil pollution and assure of long service life 

Hydraulic System:Our press brake machine uses Hoerbiger integrated hydraulic control system that the number of pipe connections, making it more reliable and easy for maintenance. 

Mechanical Crowning:
The motorized crowning system will adjust the parallelism and straightness automatically.

Product Details:

CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection even during full load operation.New EU streamlined design.The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stressThe press brake frame adopts shot blast to remove rust and sprayed with anti-rust treatment.The frame is formed by the imported CNC three-dimensional machining center in one process, which ensures the parallelism and verticality of each mounting surface.Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return (the pressure in the hydraulic system is the closed loop control of the servo main motor)The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.The foundation of every ADK press brake is a solid, mono-block frame which made from high yield steel. Which means our press brakes will perform accurately and reliably year after year.We’re so confident in our frames so that we offer a 15-year warranty with our standard machines.The main oil pump does not apply work under the drive of the servo main motor, and the energy consumption is 60% lower than that of the general CNC press brake machine.

Product Details:

CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection even during full load operation.New EU streamlined design.The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress.The press brake frame adopts shot blast to remove rust and sprayed with anti-rust treatment.The frame is formed by the imported CNC three-dimensional machining center in one process,which ensures the parallelism and verticality of each mounting surface.Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return (the pressure in the hydraulic system is the closed loop control of the servo main motor)The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.The foundation of every ADK press brake is a solid, mono-block frame which made from highyield steel.
Which means our press brakes will perform accurately and reliably year after year.We’re so confident in our frames so that we offer a 15-year warranty with our standard machines.The main oil pump does not apply work under the drive of the servo main motor, and the energy consumption is 60% lower than that of the general CNC press brake machine.

Product Details:

CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection evenduring full load operation.New EU streamlined designThe whole frame of the press brake adopt integrated welding, and by tempering to eliminatethe internal stressThe press brake frame adopts shot blast to remove rust and sprayed with anti-rust treatmentThe frame is formed by the imported CNC three-dimensional machining center in one process,which ensures the parallelism and verticality of each mounting surface.Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return(the pressure in the hydraulic system is the closed loop control of the servo main motor)The main components are through finite element analysis and optimized design by 3Dsoftware to fully guarantee the structural strength and rigidity of each component.The foundation of every ADK press brake is a solid, mono-block frame which made from highyield steel. Which means our press brakes will perform accurately and reliably year after year.We’re so confident in our frames so that we offer a 15-year warranty with our standardmachines.The main oil pump does not apply work under the drive of the servo main motor, and the energy consumption is 60% lower than that of the general CNC press brake machine.

Product Details:

CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection evenduring full load operation.New EU streamlined designThe whole frame of the press brake adopt integrated welding, and by tempering to eliminatethe internal stressThe press brake frame adopts shot blast to remove rust and sprayed with anti-rust treatmentThe frame is formed by the imported CNC three-dimensional machining center in one process,which ensures the parallelism and verticality of each mounting surface.Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return(the pressure in the hydraulic system is the closed loop control of the servo main motor)The main components are through finite element analysis and optimized design by 3Dsoftware to fully guarantee the structural strength and rigidity of each component.The foundation of every ADK press brake is a solid, mono-block frame which made from highyield steel. Which means our press brakes will perform accurately and reliably year after year.We’re so confident in our frames so that we offer a 15-year warranty with our standard machines.The main oil pump does not apply work under the drive of the servo main motor, and theenergy consumption is 60% lower than that of the general CNC press brake machine.

Product Details:

CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection evenduring full load operation.New EU streamlined design.The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress.

Product Details:

CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection even during full load operation.

·         New EU streamlined design.

·         The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress.

·         The press brake frame adopts shot blast to remove rust and sprayed with anti-rust treatment.

The frame is formed by the imported CNC three-dimensional machining center in one process, which ensures the parallelism and verticality of each mounting surface.

Product Details:

CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection even during full load operation.

·         New EU streamlined design

·         The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress

·         The press brake frame adopts shot blast to remove rust and sprayed with anti-rust treatment

·         The frame is formed by the imported CNC three-dimensional machining center in one process, which ensures the parallelism and verticality of each mounting surface.

·         Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return (the pressure in the hydraulic system is the closed loop control of the servo main motor)

·         The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.

·         The foundation of every ADK press brake is a solid, mono-block frame which made from high yield steel. Which means our press brakes will perform accurately and reliably year after year.

·         We’re so confident in our frames so that we offer a 15-year warranty with our standard machines.

Product Details:

CNC press brake has a solid and rigid frame designed ensuring minimum deflection even during full load operation.

new eu streamlined design

the whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress. .

basic unit equipped with cpu amd geode etx-lx800 500mhz, 128mb dram including  graphic colour 10” touch screen display (1024 x 600 pixels resolution 128 mb silicon disk interactive 2d graphic editor for work-pieces and tools data entry 2d graphic display of machine frame, work-piece and tools manual 2d graphic identification of the best bending sequence(option 4 fast counting circuits for line drive 0-5vdc differential encoders or npn/pushpull. The encoders are powered at 5vdc (max 200ma per channel 4 analog outputs (±10v) with 13bits + sign resolution 4 digital inputs for the zero micros 4 analog inputs, 12 bits resolution, ranges 0÷10v, 0÷5v 2 general purposes analog outputs, 0÷10v (8 bits resolution 32 digital inputs (24vdc 32 digital outputs (24vdc, 0,7a max. ) protected against overload and short-circuits 2 serial port rs232  1 can port with 9 pins subd f connector 1 ethernet port 10/100 mbit (lan connection  1 vga port for external monitor connection 2 usb (2. 0) ports. 24vdc power supply

Product Details:

The press brake frame adopts shot blast to remove rust and sprayed with anti-rust treatment

The frame is formed by the imported CNC three-dimensional machining center in one process, which ensures the parallelism and verticality of each mounting surface.

Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return (the pressure in the hydraulic system is the closed loop control of the servo main motor)

The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.

The foundation of every ADK press brake is a solid, mono-block frame which made from high yield steel. Which means our press brakes will perform accurately and reliably year after year.

We’re so confident in our frames so that we offer a 15-year warranty with our standard machines.

The main oil pump does not apply work under the drive of the servo main motor, and the energy consumption is 60% lower than that of the general CNC press brake machine.